|
Research
interests:
Born: November 19, 1949 at Stivica, near Staro Petrovo selo,
Croatia.
Studied at Faculty of mechanical engineering and naval architecture
University of Zagreb:
- B.Sc.M.E. 1975, in Mechanical engineering program,
- M.Sc. 1981, in scientific area: Engineering mechanics
of materials,
- Ph.D. 1989, in scientific area Mechanical engineering.
Employment history in education:
- 1979-1990; Research Scientist/Assistant, Engineering mechanics
and Strength of materials, Department of mechanical design,
Faculty of mechanical engineering in Slavonski Brod, J.J.Strossmayer
University of Osijek,
- 1990-1996; Assistant Professor, Engineering mechanics
and Strength of materials; Department of mechanical design,
Faculty of mechanical engineering in Slavonski Brod, J.J.Strossmayer
University of Osijek,
- 1996-2001; Associate Professor, Engineering mechanics
and Strength of materials; Department of mechanical design,
Faculty of mechanical engineering in Slavonski Brod, J.J.Strossmayer
University of Osijek.
- Guest professor at Mechanical Engineering Division at
Hochschule Bremen (1994-1997).
-
2001-...; Full Professor, Engineering mechanics and Strength
of materials; Department of mechanical design, Faculty of
mechanical engineering in Slavonski Brod, J.J.Strossmayer
University of Osijek.
Teaching in courses of undergraduate studies (B.Sc.M.E.):
- Engineering Mechanics I,
- Engineering Mechanics II,
- Strength of materials,
- Dynamics of Machinery.
Teaching in courses of undergraduate studies (M.Sc.M.E.):
- Fracture mechanics,
- Numeric method.
Research Efforts:
- Theory of elasticity and plasticity,
- Finite element method (FEM),
- Numerical analysis of large plasticity deformations,
- Contact promlems.
Publications in last 7years:
- LUKAČEVIĆ, Z.; MATEJIČEK, F.; NOVOSEL, M.:
Besonderheiten der Ingenieurausbildung an der Maschinenbaufakultät
in Slavonski Brod, Symposium (28-29.9.1994): 100 Jahr
Technikausbildung in Bremen - Ingenieure für Europa, Zbornik
radova, Hochschule Bremen, Bremen, 1995, pp 77 - 84.
- MATEJIČEK, F.; KOZAK, D.:
Comparison between Experimental and Numerical Methods
for Determining Crack Resistance Curves, Twelfth DANUBIA-ADRIA
SYMPOSIUM on Experimental Methods in Solid Mechanics, Sopron
in Hungary, 1995
- MATEJIČEK F.,
Experimental and Numerical Determination of the Parameters
of Creep, Extended Summaries of 14th Symposium "Danubia-Adria"
on Experimental Methods in Solid Mechanics, Poreč, 1997
- MATEJIČEK F.,
Experimental Determination of Creep Parameters in Numerical
Calculation, Proceedings of the 2nd Congress of Croatian
Society of Mechanics, Supetar/Brač, 1997
- MATEJIČEK F., GRIZELJ B.:
Die Analyse der Deformationen runden Platten mittels
Finite Elemente Methode unter Berücksichtigung des Einflusses
der wahren Eigenschaften des Werkstoffes, 4th International
Conference on Production Engineering CIM´97, Opatija, 1997.
- MATEJIČEK F.; SEMENSKI D., VNUČEC Z.:
Uvod u statiku sa zbirkom zadataka, Golden marketing,
Zagreb, 1999., ISBN 653-6168-88-X
- MATEJIČEK F.,
Experimental and Numerical Determination of the Parameters
of Creep, Österreichische Ingenieur- und Architekten-Zeitschrift
(ÖIAZ), 144. Jg., Heft 5/1999, pp 211-214
- ALFIREVIĆ, I.; MATEJIČEK, F.; VNUČEC, Z.:
Re-examination of Poisson's Ratio Mismatch-Correction
factor, 16th DANUBIA-ADRIA SYMPOSIUM on Experimental
Methods in Solid Mechanics, Cluj-Naploca, Romania, 1999
- GRIZELJ, B., MATH, M., MATEJIČEK, F.:
Application of FEM for Process Plate Bending, 8th
International Conference on Sheet Metal, Birmingham, UK,
2000, pp 519-528
- F. MATEJIČEK, N. GUBELJAK, D. KOZAK, M. KOÇAK,
Stress-Strain State at the Vicinity of the Crack Tip
in Strength Mis-match Welded Joint, XIII Europian Conference
on Fracture ECF13, San Sebastian, 2000 , 1U6 (CD-ROM)
- F. MATEJIČEK, D. KOZAK, N. GUBELJAK, M. OBLAK,
Numerical Modelling of the Fracture Behaviour of Welded
Joints by Considering the Crack Front Shape, XVII Danubia-Adria
Symposium on the Experimental Methods in Solid Mechanics,
Prague, 2000, pp 203-206
- N. GUBELJAK, M. OBLAK, F. MATEJIČEK, D. KOZAK,
The Influence of the Pre-crack Front Shape on the Strain
Distribution through the Thickness of the Mis-matched Welded
Joint, 3rd Congress of Croatian Society of Mechanics,
Cavtat, 2000, 397-404
- ALFIREVIĆ, F. MATEJIČEK, Z.VNUČEC,
Evaluation of some Effects of Coating Thickness,
XVII Danubia-Adria Symposium on the Experimental Methods
in Solid Mechanics, Prague, 2000, pp 11-14
|
